 |
 |
 |
|
Wera Tools' 05056490001 - Tool-Check Plus Ratchet / Socket / Bit 39PC Metric Set w/Tool Holder and 05073675001 - Kraftform Micro Precision Screwdriver 12PC Set w/Case Combo set.
Wera 05056490001 - Tool-Check Plus 39PC Metric Set w/Tool Holder Case (056490) - Combination tool consisting of a Sockets, Mini Ratchet, Bit Assortment, Mini Screwdriver Handle and More in a minimum of space. Ideal as a universal companion for a whole host of screw driving applications. High-quality Bit-holder with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Mini Ratchet for Rapid working when fastening jobs with a power tool or conventional hand tools are not feasible due to insufficient space. Rapid changeover from left to right direction and vice versa by using the switchover lever. Fast work is possible by turning the thumbwheel (with the thumb) on the ratchet head. Simplest operation even with just one hand. Ergonomic ratchet head/lever: Kraftform geometry with perfectly shaped contact areas for the fingers. The direct bit take-up in the ratchet head makes for a mini tool design and is ideal for low working heights. The small return angle of 6° allows for precise work. Robust drop-forged, full steel design. Torque of over 65 Nm. The Rapidaptor bit holder with free-turning sleeve: can be used as an eXtension; for Rapid bit change without any special tools – even the very smallest bits with just a single hand. Tough viscous bits for universal use. Sockets for both manual as well as power tool operations for almost all applications (not impact tools). German Engineered and made to high-quality standards.
PLUS
Wera Tools' 05073675001 - Kraftform Micro Screwdrivers 12PC Set w/Case (073675). The high-precision WERA® production quality is indispensable when working with such small dimensions. The three-zone concept significantly reduces screw driving times and costs. Lightning-fast twisting is achievable with the Rotating Speed-Zone-Cap and Quick-twist zone below the cap. The time-consuming fumbling of conventional precision screw driving is a thing of the past. The Power-zone with built-in soft zones near the blade tip ensures the transfer of high release and tightening torque, without which contact with the screw is lost. The precision zone directly above the blade gives the user a good feeling for the correct angle of rotation during fine-tuning work. The Wera's Black Point-tip and a sophisticated hardening process guarantee a long service life and increased protection against corrosion. The Kraftform ergonomic Anti-roll handle w/hard black handle and soft green accents. The 12-piece set includes: Slotted, Phillips, Torx and Hexagon. A custom organizer Belt-pouch / Screwdriver Case w/elastic hold downs-loops and tool flaps hold your micro driver's security in place. All Screwdriver and Case are sporting the Wera logo. German Engineered with German Steel. ed/hb
39PC Metric Tool-Check PLUS Includes:
1) Mini Ratchet
1) Multi-component Kraftform handle w/Hard Black Handle and Soft Green Accents
¼" Hex Bit Ratchet, with drop-forged steel design for standard insert bits
¼" Hex Bit holding Mini Screwdriver handle w/hard black handle and soft green zones accents
¼" Hex Rapidaptor Bit Holder
6) ¼" Drive Metric Socket: 5.5, 6.0, 7.0, 8.0, 12.0, 13.0 mm
Socket Adaptor (¼" hex to ¼" square)
¼" Bit Tips:
1) Slotted: 5.5mm
6) Phillips: 2) PH1, 3) PH2, PH3
5) Pozidriv: PZ1, 3) PZ2, PZ3
6) Torx: T10, T15, T20, T25, T30, T40
4) Security Torx: T10s, T20s, T25s, T30s
5) Hex-Plus: 3.0, 4.0, 5.0, 6.0, 8.0 mm
Micro Screwdrivers 12PC Includes:
5) Micro Slotted/Flat Screwdrivers (-): 1.5x40, 1.8x60, 2.0x60, 2.5x80, 3.0x80mm
2) Micro Phillips Screwdrivers (+): PH 00x80 (*1), PH 0x60mm **(2)
3) Micro Hex Nut Drivers (inner edge): 0.9x40, 1.5x60, 2.0x60mm
2) Micro TORX® (*) HF: T5x40, T6x60mm
1) Case Dimensions: 245 x 115 x 55 mm
*(1) Optimized for Asian PH screws
**(2) Size 0 modificated according to JCIS 0 (Japanese Camera Industrial Standard)
WARNINGS! Always wear approved eye protection.
NOT insulated. Will NOT protect against electrical shock.
TORX® is a registered trademark of Acument Intellectual Properties, LLC.All Trademarks Belong to Their Respective Companies.Safety Info:
California proposition 65 warning - www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features & Benefits:
Tool-Check Plus 39PC Metric:
- Mini Ratchet: Convenient direction change thanks to switchover lever
- Fine-pitched ratchet mechanism and small return angle of 6°
- Very robust without any restrictions on torque
- Quick-release chuck w/Rapidaptor technology
- Take EZ Tool Finder, Sockets are Color-coding by Size
- Wera's Non-glare Satin finish w/Easy-to-read making
Micro Screwdrivers 12PC
- Kraftform Micro set in a robust pouch
- Kraftform Micro handle for fast and ergonmic working
- The Wera Black Point tip offers an exact fit and optimum corrosion protection
- Holding function for TORX® screws
- Take it easy tool finder: color coding according to profile and size
- E.g., for electricians, opticians, precision mechanics, jewelers or IT hardware fitters
|
|
|
|
|
|
| PRODUCTS RELATED TO THIS ITEM - CUSTOMERS BOUGHT |
|
|
|
|