 |
 |
 |
|
Big Gator Tools' MDG1000NP - Metric V-DrillGuide® with 17-Drill hole sizes: 13, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5mm, is the largest hole size available at this time from BGT! Drill straight all the time using this V-DrillGuide®. It’s like a portable drill press on accuracy, with the fraction of the cost! Time and money will be saved by drilling a hole only once with perfectly aligned holes on various surfaces. Natural steel finish, non-plated. Portable, pocket-sized. Made from special nickel alloyed steel that is heat treated for durability. Has a precision ground base to assure stability and accurate perpendicular alignment and center taps to cut perfectly straight threads on flat or curved surfaces. Helps prevent misalignment and tap damage saving time and money. Automatically squares up the tap with the surface. The center "V-groove" along the bottom of the guide allows for perpendicular alignment with all tap sizes, a snug fit on curved receiver barrels or parts with corners. Outer edges are surface ground to precise tolerances for a tight fit on flat surfaces. Precision machined from nickel-alloy steel then heat-treated for strength durability and dimensional stability. Comes in a corresponding handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly™. Lifetime Factory Warranty - ISO 9001:2000 Certified - American Engineered and Made in the USA. ed/hb.
To see more V-DrillGuide® and V-DrillGuide®, go to > TOOL BRANDS > BIG GATOR TOOLS
MDG1000NP - Portable Metric V-DrillGuide® - w/17 Metric Size: 3, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5mm
Dimensions:
5.5 x 7/8-9/16 x 7/8"
LENGTH x WIDTH x HEIGHT
WARNINGS! Always ensure that you and persons in the vicinity wear approved eye protection.
NOT insulated. Will NOT protect against electrical shock.
NOTE:
NOT TO BE USE WITH HAMMER DRILLS
Tool in pictures not included!
V-DrillGuide® and V-TapGuide® is a registered trademark of BIG GATOR TOOLSAll Trademarks Belong to Their Respective Companies. Safety Info:
California proposition 65 warning - www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features & Benefits:
- Portable, Pocket-sized
- 90° V-groove along the bottom allows perpendicular alignment on round parts or corners
- Flat base: able to use on flat surfaces
- Heat-treated Steel: tight tolerance and stronger tool to clamp
- Hole alignment marks are permanently embedded on either side of drill bit guide
- Drill sizes are embedded on top of drill bit guide for explanatory drilling sizes
- Wood, metal, plastic etc., can be used on corners, round or flat surfaces
- EZ-to-use: hold the drill guide on the material, clamp and drill
- Natural steel finish non-plated
- PegBoard-Friendly™ Packaging: Plastic Hanger Tube Storage Case w/surface ridges to prevent opening
- Lifetime Factory Warranty - ISO 9001:2000 Certified - American Engineered and Made in the USA
|
|
|
|
|
|
|