|
Tempo Communications' OFL100 NA - Optical Time-Domain Reflectometer (OTDR) enables the front-line technician to quickly locate loss events in the last mile of the FTTx network.
The touchscreen provides an intuitive interface for even newly provisioned technicians so that they can locate loss events such as cut fibers, contaminated or damaged connectors and excessively bent fibers. The Auto Mode allows for the technician to initiate a measurement without adjusting any test parameters. The Expert OTDR Mode provides access to all the features that the savvy OTDR technician demands so that they can refine measurement parameters to be able to troubleshoot the most demanding faults.
Results can be displayed using a traditional OTDR trace or linear map with user-selectable Pass/Fail analysis. All events are measured, annotated, saved and exported as an industry-standard SOR file that is compliant to GR196 Telcordia standards. The SOR file can be imported into the Trace Viewing program where analysis can be performed and test results can be saved as a PDF report.
The integrated VFL provides a safe level of red laser light to visually locate fiber faults within the OFL100 dead zone. The VFL can be used to confirm continuity of improperly labeled or not labeled fiber optic cables up to approximately 5km. The VFL output is set to ≤1mW which is a Class 2 device that is deemed to be safe by the FDA.
The OPM can be used to measure absolute optical power levels as well as allow the technician to perform loss measurements on a fiber link of the device when used in tandem with the integrated stabilized laser source. Full fiber tracing is supported with tone injection and sensing. ed/hb
Includes:
- OFL100
- Power Supply w/USB cable
- Soft Carry Case w/Strap
- SC/APC Adapter
- Certificate of Conformance
- Quick Reference Card
- 8GB SD Card
Note: OTDR - Optical Time-Domain Reflectometer NA - North American Power Supply
In Picture: SLS520 - Stabilized Light Sources, Fiber Patch Cord and Spool of Fiber (Not included)
Please - Call for Price and Availability
Tempo® Communications Mfg. Part # ******** - Cat # OFL100-OTDR-NA
OTDR: - Wavelength: 1310/1550 nm
- Dynamic Range: 26/24 dB
- Measurement Ranges: 500 m, 1 km, 2 km, 4 km, 8 km, 16 km, 32 km, 64 km and 100 km
- Pulse Widths: 3 ns, 5 ns, 10 ns, 20 ns, 30 ns, 50 ns, 80 ns, 160 ns, 320 ns, 500 ns, 800 ns, 1 μs, 2 μs, 3 μs, 5 μs, 8 μs, 10 μs and 20 μs
- Measurement Accuracy: ±(1m + Sample Interval + 0.005% x Test Distance)
- Linearity: ≤0.05 dB/dB
- Distance Resolution: 0.001 m
- Loss Analysis: Four Point & Five Point
OPTICAL POWER METER: - Wavelength Range: 800 nm ... 1700 nm
- Measurement Range: +26d Bm ... -50 dBm
- Measurement Resolution: 0.01 dB
- Measurement Accuracy: ±5%
- Tone Frequencies/Sensing: CW, 270 Hz, 330 Hz, 1 kHz and 2 kHz
VISUAL FAULT LOCATOR: - Wavelength: 650 nm ±20 nm
- Output Power: <1 mW
- Mode of Operation: CW, 1 Hz and 2 Hz
STABILIZED LIGHT SOURCE:- Wavelength: 1310/1550 nm
- Output Power: ≥-5 dBm
- Power Stability: CW, ±0.5 dB/15 minutes after continuous on of 15 minutes
OPTICAL LOSS TESTING:Wavelength: 1310 nm and 1550 nm RJ45 SEQUENCE TESTING:
- Cable Type: Straight and Interleaved (T568)
GENERAL INFORMATION: - Internal Storage: 8 GB (>200,000 Curves)
- Interface: USB Type C, 8 GB SD Card
- Display: 4.3” 800 x 400 TFT LCD Touchscreen
- Power Supply: AC to DC 100 V ... 240 V AC, 50/60 Hz
- Battery Lifetime: >12 Hours Continuous Test
- Weight: <0.5 kg Including Battery
- Operational Temperature: -10°C ... +50°C
- Size: 173 x 109 x 45mm
Tempo® Communications Mfg. Part # ********* - Cat # OFL100
Note: Please read description carefully. Do not base your order on the picture presented. Specials order - Not returns! WARNINGS!Always ensure that you and persons in the vicinity wear approved eye protection. Never use on or near live circuits.
Safety Info: California proposition 65 warning - www.P65Warnings.ca.gov
|
|
|